Grooved End Cap
- Size range: DN50-DN300
- Wall thickness: 2.0-8.0 mm
- Seal ring size: matching groove depth 2-5 mm
As a manufacturer and producer of pipe fittings for over 20 years, fireminus can provide you with high quality pipe fittings at low prices.
Grooved End Cap is a kind of sealing fittings used to close the end of the grooved pipe, through the clamp mechanical connection to realize quick installation, suitable for fire fighting, water supply, industrial and other pipeline systems, can prevent the media leakage and foreign body invasion, suitable for carbon steel, stainless steel and PVC and other materials pipeline.
Grooved End Cap
Built-in sealing components such as EPDM or NBR rubber ring can operate stably under the temperature range of -40℃~120℃ with safety and reliability, and the sealing under high pressure grows significantly.
Keep the pipeline temporarily blocked or permanently closed for easy system segmentation inspection and maintenance.
Rubber ring expands under fluid pressure and stays close to the pipe wall, can withstand up to 2.5MPa working pressure.
Suitable for DN50-DN300 pipe diameters, compatible with American Standard (ANSI), National Standard (GB) and other standard groove sizes.
Grooved End Cap Dimensions
| Nominal Diameter (mm) | Pipe outsGe measurement mm | L mm | Rated Pressure (MPa) |
| 50 | 60.3 | 19 | 2.5 |
| 66 | 76.1 | 25 | |
| 80 | 88.9 | 25 | |
| 100 | 108 | 25 | |
| 100 | 114.3 | 25 | |
| 125 | 133 | 25 | |
| 125 | 139.7 | 25 | |
| 150 | 159 | 25 | |
| 150 | 165 | 25 | |
| 150 | 168.3 | 25 | |
| 200 | 219 | 28 | |
| 250 | 273 | 30 | |
| 300 | 323.9 | 38 |